background image

INSTALLING LENS PORT

 

Perform proper Lens Port O-ring and Housing O-ring Contact Surface maintenance prior 

to   installation   as   described   in   MAINTENANCE   and   O-RING   GREASING   & 

MAINTENANCE ( 1) on pa

ges seven (7) and eight (8).

 

Please conduct the following operations in a clean area with low humidity and dust.

CAUTION!

 Use the Lens Ports intended for the mode in which you plan to shoot. Failure to 

use the proper Lens Port could result in image vignetting and distortion, as well as possible 

damage to the camera.

1. Attach 30x Lens Port by carefully screwing it clockwise into the Housing Port, while taking 

care NOT to strip the threads of the lens port or housing port.

2.   When   the   first   O-ring   of   the   lens   port   engages   the   lens   will   become   difficult   to   turn. 

Continue to turn until closed, taking care NOT to over tighten.

To remove the lens port turn counterclockwise.

ZOOM LEVER LOCK SCREW

Use the Zoom Lever Lock Screw to lock Zoom Lever when using the optional Macro Zoom  

Lens Port OP-MZ-TZ70 with the housing. 

Accidentally zooming in may cause damage to the 

port and lens.

4.

Summary of Contents for CWOP-SH2














Reviews: