background image

INTRODUCTION

OLYMPUS STYLUS SH-2 and SH-1 Waterproof Housing CWOM-SH2

 

Thank you for purchasing the RECSEA CWOM-SH2 Waterproof Housing.

 To ensure proper and safe use, please thoroughly read this manual.

 Improper use may cause leakage causing irreparable damage to your digital camera.

 Please check, and test the housing according to this manual prior to use.

Neither   NTF   Corporation,   Seatool/Resea   nor   their   agents   shall   warrant   or   bear   any 

responsibility   for   any   incident   related   to   water   leakage,   damage   or   loss   of   data, 

unauthorized modification, disassembly and repair; or any accident causing physical or 

material damage while using this product.

This product is manufactured by machining methods. As a result, there may be minor 

scratching or tool marks. These are a normal part of the manufacturing process, do not 

effect operation of the housing or camera, and are not subject to warranty or any other 

claims.

WARNING!

 

Do not store or leave housing in reach of infants or small children. The strap may cause 

chocking and suffocation, or small parts may be swallowed causing injury.

Please   remove   digital   camera   from   housing   when   not   in   use.   Battery   malfunction   or 

damage may cause fire.

 

The housing body is made of Polyoxymethylene (POM) and Acrylic. However, saltwater 

can cause rusting to some parts so be sure to rinse thoroughly using fresh water without 

fail.

CAUTION!

 To prevent water leakage and damage, DO NOT disassemble or modify this housing.

 Do not store the housing in areas of high humidity, high or low temperatures, or areas of 

extreme temperature fluctuation. Doing so may cause deterioration of parts. 

 When diving, use a method of water entry that protects the housing from shock, which can 

cause water leakage. If at all possible have housing handed to you after entering the 

water.

 This housing is designed to withstand depths of 60 meters (197 feet). Using the housing at 

deeper depths may cause damage and water leakage. Use caution and monitor depth.

 

Remove O-ring or leave housing slightly open when transporting by plane. Pressurization 

of a sealed housing during transport may cause damage or make it difficult to open.

 When opening and closing the housing be mindful of dust and other contaminants, which 

may adhere to the to the O-ring, possibly causing water leakage and damage.

 Always check O-ring prior to each use. Pay special attention to the grease condition and 

that the O-ring is seated uniformly in the O-ring groove with no twists or bulges. Neglecting 

to check the O-ring prior to each use may result in water leakage and damage. 

FEATURES OF THIS PRODUCT

Compact   and   durable,   CNC   precision   machined   corrosion-resistant   POM   and   acrylic 

housing.

 

Lightweight, ergonomically designed.

 

Maximum Operating Depth (MOD) of 60 meters (197 feet).

 

Changeable Lens Port with Dual Lens Port O-ring system.

 

Port Control Ring Dial.

 

Complete camera function control.

 

New RECSEA dial locking system for easier opening and closing.

 

Quality silicone O-ring.

 

Variety of supported RECSEA original options.

1.

Summary of Contents for CWOP-SH2














Reviews: