Warning
Electric Shock Hazard
To reduce the risk of fire or electric shock, do not remove any cover or expose the device to
rain or moisture. No user-serviceable parts are inside. Refer servicing to qualified service
technicians. Do not use immediately after moving from a low temperature to high
temperature environment, as this causes condensation, which may result in fire, electric
shock, or other hazards.
Lightning
For added protection for your device receiver during a lightning storm, or when it is left
unattended and unused for long periods of time, unplug it from the power outlet and
disconnect any antenna or cable system. This helps prevent property damage and personal
injury from lightning and power line surges.
Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can fall into such power lines or circuits.
When installing an outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
Handling the LCD Panel
●
Your IFP’s screen is made of glass. Do not drop your IFP or hit, jolt, or press hard
against the LCD panel. If the screen breaks, be careful of broken glass.
●
If the LCD panel is broken, make absolutely sure that you do not touch the liquid in
the panel. This may cause skin inflammation.
●
If the liquid gets in your mouth, immediately gargle, rinse, and consult with your
doctor. Also, if the liquid gets in your eyes or touches your skin, consult with your
doctor after rinsing for at least 15 minutes or longer in clean water.
Replacement Parts
When replacement parts are required, make sure that the service technician uses
replacement parts specified by the manufacturer that have the same characteristics as the
original part. Unauthorized substitutions may result in fire, electric shock, personal injury,
or other hazards.
Safety Check
After completing any service or repair to this device, ask the service technician to perform
routine safety checks to determine that your IFP is in correct operating condition.
Version: 17.1.6.0
Page 6
