About Cleaning & Maintenance
(ALWAYS UNPLUG UNIT BEFORE CLEANING!)
To clean this unit, wipe with a soft, dry cloth.
Clean the cabinet with a soft, lint-free cloth, If the cabinet is especially dirty, moisten a soft,
lint-free cloth in a weak detergent solution, squeeze the excess moisture from the cloth,
then wipe the cabinet with the cloth. (ALWAYS UNPLUG UNIT BEFORE CLEANING!)
●
Use a clean cloth to dry the cabinet.
●
Use eyeglass cleaner to remove stubborn dirt from the screen.
●
Never use alcohol, paint thinner or benzine to clean this unit.
Carrying or Moving the IFP
●
When you move the IFP , hold the frame of the IFP .
●
Be aware of the danger or harm which may caused by carrying or moving the IFP, as
the bezel is very thin.
●
When transporting, do not subject the unit to shocks or vibration, or excessive force.
Selecting a Location
You should select a location for the IFP that meets the following conditions:
●
Direct light does not reflect on the screen;
●
There is close access to a grounded power outlet;
NOTE: Watching an IFP in a room with total darkness or with a reflection on the screen may
cause eyestrain.
Remote Control Use, Maintenance & Batteries
Remove remote battery cover, install two AAA batteries making sure to match the + and -
symbols on batteries to symbols in the battery compartment and then replace the cover.
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be
sure to follow the instructions below:
●
Place batteries with their terminals corresponding to the (+) and (–) indications.
●
Different types of batteries have different characteristics. Do not mix batteries of
different types.
●
Do not mix old and new batteries. Mixing old and new batteries can shorten the life
of new batteries and/or cause old batteries to leak chemicals.
●
Remove batteries as soon as they are non-operable. Chemicals that leak from
batteries can cause a rash. If chemical leakage is found, wipe with a cloth.
●
Dispose of batteries in a proper manner.
Version: 17.1.6.0
Page 11
