Control module STM 22 RED/DUO
6
B6_Control_SYS20_EN_V1.3.doc
Art. Nr. 102-020401135
36 / 36
6.5.
Components RED/DUO installations
MS Power set STM22 RED/DUO
Control module STM 22 RED/DUO
2 pc. ATE
Cable and installation material
102-020401204
BAT 20 RED
102-020808835
Basically, all the components for a RED-system installation are included in both above listed as-
sembly kits.
Mechanically there is no difference between a pure DUO system and a RED system (with certifica-
tion for escape and rescue routes). On a RED installation, a special RED-software for CPU1 and
CPU2 is installed on the control module STM 22 RED/DUO. This software complies with the stan-
dards: EN 13849-1:2006 Category 3 PLd.
On RED system the Encoder cable must be also connected on the 2. Motor.
6.5.1.
Overview of the additional components
Basically, the components will be mounted and wired analogue to a normal sliding door.
Below we refer to the necessary additional components for a RED installation.
Note that STM 22 RED/DUO will be positioned next to MOT 1
(short Encorder connection cable)
The BDE – V for the night closure must be supplied locally. There are 2 closing
contacts necessary.
NOTE
NOTE
Mot 1
Mot 2
STM 20 RED/DUO
BAT 20 RED