Record STM 20 RED/DUO, Manual

Page: 26 / 36

Control module STM 21 RED
5
B6_Control_SYS20_EN_V1.3.doc
Art. Nr. 102-020401135 26 / 36
Multifunctional key Function, after pulses have been given
1 pulse Releases an opening movement (AKI)
2 pulses Calibrating ELS
3 pulses Calibrating door parameters
4 pulses Entering programming level
5 pulses
RED

Redundancy test, if system connected to mains voltage
DUO

Battery emergency reaction, as long as system discon-
nected from mains

Battery test in case of mains connection
8 pulses Loads default values of door type selected
9 pulses Back to factory settings (afterwards emergency stop must be
actuated within 10 seconds)
14 pulses Hardware reset is performed after approx. 12 seconds
Connector designation Connections
J1 Terminals 25 – 28

for BDE-D
J2 Terminals 1 – 12:
Functions according to wiring diagram 102-020110534
J3 Terminals 13 – 17 (only used with RED applications):
Functions according to wiring diagram 102-020110534
J4 Battery 1 (used for DUO and RED applications)
J5 Battery 2 (only used for RED applications)
J6 Locking
J7 Motor brake
J8 ATE motor 1
J9 ATE motor 2
J10 CAN bus / CAN sensors
J11 Extra printed circuit board ELS (ZLP-ELS)
J12
Extra printed circuit board AKI (ZLP-AKI)
J13 CAN bus plug for FPC-servicing
J14 Reserved for future modules
J15 Encoder motor 1
J16 Encoder motor 2
J17 Reserved for future modules
J18 Reserved for future modules