7
Malfunctions
30 / 32
BAL_C127_X_SU_H-B_OFFSET_EN_1V1_REC_121-006454632
RESET HARDWARE BDE-D
Connecting to control unit....
Connection has been established (example)
– After resetting, the control panel is again operational
– If this is not the case, please inform our service centre
7.4
Possible troubleshooting
– Based on the status display some errors can sometimes be eliminated
– If you are not sure, please contact the relevant service centre
– Before you call, write down the data displayed on the BDE-D. This information provides the tech-
nician with important informations for troubleshooting
– If several status messages are active at the same time, they are numbered: e.g. error 1 / 2
– Pressing the E-button permits to navigate from one error message to the next one
Example:
Which information?
Procedure
How displayed? (Example)
Status text and number
– It is automatically displayed on the
BDE-D
Software-Versions
– Press the following button on the
BDE-D for 2 seconds
