2
General information
12 / 32
BAL_C127_X_SU_H-B_OFFSET_EN_1V1_REC_121-006454632
2.6
Target groups
CAUTION
Risk of injury if personnel are insufficiently qualified!
If unqualified personnel work on the system or are in the danger zone of the system, dangers may
arise which can cause serious injuries and considerable damage to property.
a) All work must be carried out by qualified personnel only.
b) Keep unqualified personnel away from danger areas.
This operating manual is intended for the target groups listed below:
– Operating entity of the system:
the person who is responsible for the technical maintenance of this system
– Operator of the system:
the person who operates the system every day and has been suitably instructed
2.7
Abbreviations
Abbreviation
Description
ABS
Absolute pulse generator
AKA
Actuating-contact „outside“
AKG
Actuating-contact „common“
AKI
Actuating-contact „inside“
ASK
Terminals inside header
ATE
Drive unit
BDE-D
Electronic control unit
BDI
Control unit (rocker switch)
BDI-M
Circuit board for mechanical control unit
BKL
Control unit LED
BODYG
Sensor „Bodyguard“
CAN-H
Serial data interface
CAN-L
Serial data interface
CPU
Central processing unit
DFA
Automatic swing door operator
EEPROM
Program memory
ES
Electrical circuit diagram
FV
Manufacturing regulation
GTR
Gearing
HS
Main switch 2-pole
IKG
Encoder
KA
Cable exit
LED
Light Emitting Diode
LD
Light Emitting Diode
LS
Cable plan
MF
Multifunctional switch
MOT
Motor
MP
Principal assembly diagram
NA
Emergency stop
NET
Power supply unit
NS
Main power switch
NSA
Mains failure
RAD
Radar, Motion sensor
