30
Connect
TM
App Aim Mode
This feature will allow you to check your cameras
placement to be sure it is aimed correctly.
If you have “Real Time Access”, you can enter Aim mode
in the Connect app any time the camera is on and armed.
The app will wake up the camera to start aim mode.
If you do not
have “Real Time Access”, you will need to
put
your camera into “Cell Aim Mode” using the menu
on
your camera. Once in Cell Aim Mode the camera will take
and send a photo every 3-5 seconds, allowing you to
adjust the placement of the camera to capture the area of
interest correctly.
You can also “Show
motion zone overlay” to see
approximately where motion will trigger the camera.
NOTE
:
These images will not be saved to your photos for viewing later.
NOTE
:
Aim Mode photos count toward your monthly total.
