25
©RECONYX, Inc.
USE DEFAULTS
–
NO
, Yes, Factory Reset
If you choose Yes, your settings will be reset to defaults (shown above in
RED
CAPITAL
letters). Defaults will not reset your date, time, battery type or location
information. If you choose Factory Reset, all of your settings will be reset to factory
settings and your camera will re-boot as if it were the first time you powered it on.
TIP:
You can return to the Main Menu options at any time by simply pushing the “up”
directional arrow button.
OTHER
1)
PIR TYPE
–
LONG RANGE
,
HF Legacy
(HL2X
–
NA
)
HF Legacy will function the same as 1
st
generation HyperFire
camera’s.
2)
Loop Recording
–
OFF
, On
Loop Recording allows you to run perpetually without ever filling a memory card. The
camera will overwrite the oldest images and/or videos once the card is full.
3)
Firmware Updates
–
ALLOW VIA CELL
, SD Card Only
4)
RECORD AUDIO
–
ON
,
Off
If you would like to record videos without audio, choose Off.
5)
EXT TRIGGER PICS
–
OFF
, on
If your camera has the external trigger option choosing “On” will use the
number of pics
and
interval
specified under Motion Options.
6)
EXT TRIGGER VIDS
–
OFF
, on
“On” will use the video length specified under Motion Video options.
7)
EXPORT CONFIG
–
NO
, yes
If you would like to save the settings from one camera so that you can load the same
settings to another camera, you can choose Yes. This will create a folder on your SD
card called RECONYX, where a config file will be saved (HF2SEC.CFG for the HS2X,
and HF2LIC.cfg for the HL2X).
All settings will be transferred from one camera to the next
except for location,
date/time, and battery type.
If you insert this card into another HyperFire 2™ camera
of the same type it will load
the settings onto that camera. The file will be erased from the card once the settings
are applied.
You can also copy the folder and contents onto additional SD cards for programming
multiple cameras.
