12
Secure Digital
®
(SD, SDHC, SDXC) Card Specifications
A Secure Digital (SD/SDHC/SDXC) card is used to store the pictures your camera
captures. These images may be transferred to your computer using standard image
viewing software or RECONYX
®
MapView
™ mapping and i
mage management
software.
Insertion and Removal of the memory card
Make sure the orientation is correct and that the card is aligned properly. Push
gently on the memory card as shown below until it clicks into place.
Warning!
Inserting the memory card upside down or backwards could damage the
camera or the memory card.
Damage resulting from inserting the card
incorrectly is not covered under warranty.
To remove memory cards:
1)
Press <OK> to disarm the camera (the battery status and number of pictures
taken since last armed will be displayed on the LCD).
2)
Switch the power OFF.
3)
Press and release the card to partially eject the memory card.
4)
The card can then be removed by grasping it with your fingers.
NOTE
:
Always disarm the camera (by pressing OK) and switch the power off before
removing or inserting the memory card.
