HandPunch 3000/4000 Operations and User’s manual
24
LIMITED WARRANTY
Recognition Systems, Inc. (the "Company") warrants to the original user the products
manufactured by the Company (the "Product") to be free of defects in material and
workmanship for a period of one year from the date of purchase by such user or 15 months
from the date of shipment from the factory, whichever is sooner, provided:
1. The Company has been notified within such period by return of any alleged defective
product, free and clear of all liens and encumbrances, to the Company or its authorized
dealer, transportation prepaid; and
2. The Product has not been abused, misused or improperly maintained and/or repaired
during such period; and
3. Such defect has not been caused by ordinary wear and tear; and
4. Such defect is not the result of voltage surges/brownouts, lightning, water
damage/flooding, fire, explosion, earthquakes, tornadoes, acts of aggression/war or similar
phenomenon; and
5. Accessories used as integral to the Product have been approved by the Company.
The company shall, at its option, either repair or replace, free of charge, the Product found,
upon the Company's inspection, to be so defective, or if agreed upon, refund the purchase
price, less a reasonable allowance for depreciation, in exchange for the Product.
THE COMPANY MAKES NO OTHER WARRANTY AND ALL IMPLIED
WARRANTIES INCLUDING ANY WARRANTY OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ARE LIMITED TO THE DURATION OF
THE EXPRESSED WARRANTY PERIOD AS SET FORTH ABOVE.
THE COMPANY'S MAXIMUM LIABILITY THEREUNDER IS LIMITED TO THE
PURCHASE PRICE OF THE PRODUCT, IN NO EVENT SHALL THE COMPANY BE
LIABLE FOR ANY CONSEQUENTIAL, INDIRECT, INCIDENTAL OR SPECIAL
DAMAGES OF ANY NATURE ARISING FROM THE SAME OR THE USE OF THE
PRODUCT.
Recognition Systems reserves the right to make changes in the design of any of its products
without incurring any obligation to make the same change on units previously purchased.
Note: This equipment has been tested and found to comply with the limits for a Class A
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instruction manual, may cause
