TonerRefillKits.com
RechargX™ RX201X v1
Mon - Fri 8am - 5pm ET © 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the
2012.01.10
800.527.3712 or 352.343.7533 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved.
Page 6 of 9
Step 11: Locate and Remove the Screws
Holding the Gear End-Cap in
Place
The cartridge gear end-cap is held in place by
three screws, shown by the arrows in figure 11.
Using a phillips-head screwdriver remove the
screws holding the end-cap in place.
Step 12: Remove the Gear End-cap
With the screws removed lift the gear end-cap
up and off of the toner cartridge and set it aside
for future use (figure 12).
Step 13: Locate the Flag gear
In the cartridges’ current orientation the flag
gear is the large black or gray gear on the right
side of the toner cartridge, shown by the arrow
in figure 13.
NOTE:
The gear will be black on the black
cartridge and gray on the color cartridges.
ë
ë
ë
Figure 11:
Locate and remove the screws holding the gear
end-cap in place
Figure 12:
Remove the end-cap
ì
Figure 13:
Locate the flag gear
