background image

TonerRefillKits.com

  

RechargX™ RX201X v1

Mon - Fri  8am - 5pm ET                     © 1995-2011 ReChargX™, EmptyX, TonerRefillKits and TonerRefillKits.com, the TonerRefillKits logo, the  

2012.01.10

800.527.3712 or 352.343.7533                 ReChargX™ and EmptyX logos are trademarks owned by TonerRefillkits, LLC. All rights reserved. 

Page 8 of 9

Step 16: Locate the Tab on the Flag gear 

on the Color Cartridges

To reset the flag gear you must first locate 

the tabs on the flag gear itself. The tab is 

found in the seven o’clock position on the flag 

gear, shown by the white circle in figure 16.

Step 17: Resetting the Flag gear

You’ll  need  to  rotate  the  flag  gear  counter 

clockwise  just  far  enough  so  the  tab  in  the 

seven o’clock position is now in the five o’clock 

position.  The  path  from  the  seven  o’clock  to 

the five o’clock is shown by the red arrow in 

figure 17a.

Using  the  thumb  of  your  left  hand,  hold  the 

metal  spring  in  place  so  it  doesn’t  pop  off 

while the other hand grabs and lifts up slightly 

making sure not to remove the flag gear from 

the cartridge (figure 17b).  

With the gear lifted up, rotate it counter clockwise 

so the tab in the seven o’clock position of the gear 

is in its new location in the five o’clock position, as 

shown in figure 17c.

Figure 16:

 Locate the second tab on the flag gear

Figure 17a: 

The path of the tab on the lower left of the gear

Figure 17b:

 Hold the metal spring in place and lift up 

slightly on the flag gear

Figure 17c:

 Tab in it’s new location

Summary of Contents for RX201X










Reviews: