ReChargx RX201X Instructions Manual Download Page 9

Page: 9 / 9

TonerRefillKits.com

RechargX™ RX201X v1

2012.01.10

Page 9 of 9

Step 18: Reinstall the Cartridge End-cap

Place the end-cap back onto the cartridge in the

same orientation as it had been prior to being

removed, then use a philips-head screwdriver

to replace each of the screws back into the end

cap (figures 17).

Step 19: Removing the Piece of Paper

With the cartridge refilled and the flag gear

reset, remove the paper from both sides of the

developer roller, as shown in figure 18.

This piece of paper can now be discarded.

Congratulations – You’re Finished!

Congratulations! You have successfully refilled

your Brother TN315 toner cartridges.

Enjoy your savings. You’ve just saved $84.00 by

refilling your black toner cartridge and/or $91.00

by refilling each of your color toner cartridges!

-End of ReChargX™ RX201X Instructions-

Customer Service / Technical Support

To further help your ReChargX™ RX201X Toner

Refill procedure, we are always ready, willing

and happy to answer any of your questions or

comments via technical support.

Please contact us at 352.343.7533 or

800.527.3712 M - F 8am - 5pm ET.

Additionally, you may also chat with us using

Live Help on our website (M - F 8am - 5pm ET)

or submit a technical support ticket at:

www.TonerRefillKits.com/Tech_Support.php

Figure 17:

Reinstall the screws that held the end-cap in

place

Figure 18:

Remove the piece of paper from the toner

cartridge

Summary of Contents for RX201X










Search results

Summary of Contents for RX201X

Reviews:

Related manuals for RX201X

Brands by name

Popular brands

ReChargx RX201X, Instructions Manual

Search results

Summary of Contents for RX201X

Reviews:

Related manuals for RX201X

Brands by name

Popular brands