FUNCTION
The electric mixer
ÅÌ1-950E-2, ÅÌ2-1500E-2
is intended for mixing paint, glue, seal-
ing compounds, varnish, plaster, building solution, concrete, epoxy resin, bi tumen and
other similar materials. The mixer has built-in electronic rotational speed control. With
electronic speed control you can select the rotational speed that is best suited for your
job. The side handle enhances stability and ease of operation.
Fig.1
TECHNICAL DATA
EM1-950E-2
EM2-1500E-2
Power consumption ............................. 1300 W
2000 W
Voltage .................................................230 V~
230 V~
Supply current frequency .....................50 Hz
50 Hz
No-load spindle rotation speed ........... 0-650/0-1000 min
-1
0-330/0-500 min
-1
The volume of mixed material, max.... 65 l
90 l
Inner thread on the spindle ................. M14x2
M14x2
Mode of operation ................................
S1 (continuous)
Protection class (EN 60745) ................
/ II
(Double insulation)
Weight (without side handle,
mixing extension piece...) .....................3,97 kg
5,95 kg
STANDARD DELIVERY
SAFETY INSTRUCTIONS
Do not operate the mixer if:
– any part of it is damaged;
– the power switch does not work properly;
– the brushes are sparking at the commutator and a circular flame is visible;
– smoke or a distinctive odour of burning insulation is detected.
Unplug the mixer before making any adjustments or inspections.
Check cable and plug for damage prior to connecting the mixer to a power supply.
Replace defective or damaged cable at an authorized service centre.
Do not touch the mixing extension piece untill it stops completely.
Always use the side handle.
Make sure that the container with material is secure before starting mixing operation.
Always place the cable towards the rear of the mixer.
Do not expose the cable to heat or oil.
Never carry the mixer by the cable.
Switch off immediately if the mixer stops (loss of power, jamming of moving parts,etc.).
Avoid dangerous or explosive environments.
Mixer .............................................1
Side handle .................................. 1
Bolt 5.8VZM12x20DIN933 ........... 1
Spring washer VZ/B12DIN127 ..... 1
Washer VZ13DIN125 ................... 1
Mixing extension piece ................. 1
Carbon brush ............................... 2
Operating manual .........................1
Safety instructions ....................... 1
Diagram of Spare Parts ............... 1
1 – gear box
2 – side handle
3 – electric motor
4 – power cord
5 – lock-on button
6 – power switch
7 – speed adjustment
wheel
8 – speed selector
EM2 07.201
1
- 13 -
Summary of Contents for EM1-950E-2
Page 2: ...3 EM2 07 2011...
Page 8: ...10 6 1 6 6 1 5 6 7 1 9 EM2 07 2011...
Page 10: ...3 3 11 EM2 07 2011...