Instructions for kit #HB 1900
Test Assembly: Dormer page 10
□
6 Test Assembly (continued).
D. The Dormer
Tape Dormer Sides to the Dormer Front set, lined up at the top
Tape the Dormer Front/Sides to the Front Roof inside the
cutout.
Tape together the Dormer Roofs at the peak. Tape the Dormer
Roof set to the Front Roof on top of the Dormer
Lined up on top
Dormer Side
Dormer Roofs
Measure for shingle guidelines from the top of the Roof. Mark
every
5
/
8
” down both sides of the Front Roof, the Porch Roof, and
the Rear Roof set. The guidelines themselves may be easiest to
draw after the roofs are removed and they are fl at on the table, but
measure and mark now. Measure and mark the Front edges of the
Dormer Roofs and Cricket Roofs every
5
/
8
” starting at the top
Shingle Guidelines every 5
/
8”
1
1
/
4
”
5
/
8
”
1
7
/
8
”
2
1
/
2
”
Dormer Roof
front edge
Stand the Dormer and Cricket Roofs on their
Stand the Dormer and Cricket Roofs on their
front edges and use a Divider to extend the
front edges and use a Divider to extend the
marks for shingle lines
marks for shingle lines