Page 23
Accessories
Real Carriage Door & Sliding Hardware Copyright 2020© all rights reserved
Remotes
Refer to page 39 in the Sommer manual
for additional programming, and deleting of
transmitters information.
Preprogrammed Remote Functions
1. Hold until the unit moves
• Do not continue to press the button or it will go
into “dead man” mode
2. Hop function
• Hold button until the unit jumps, continue until it
reaches the location that is desired
3. Clone additional remotes (remotes must be
identical model)
Programming Additional Remotes
To do this you must be in range of the opener.
1. Press and hold down the second button on your
currently working
•
At the same time press and hold the first
button together (with the second button) for 3-5
seconds
•
The LED light on the motor will flash
2. Release the two buttons
3.
This puts it in learn mode and will remain for 30
seconds
4.
Press any button on your new remote to clone
it
5. The opener light will remain steady
6.
Second remote is programmed
SOMweb
The SOMweb tool allows you to control your
operators (up to 10) from the convenience of your
smartphone, tablet or computer via app or web
browser. Functions include:
• Open and close the door
• Check door status
•
Real-time notifications
•
Supports voice control via Siri and Google
• HomeKit technology alllows use of Apple Home
App
With IFTT platform (additional) you can utilize Alexa
voice control, and creation of events/scenarios.
Optional expansion for up to 50 users and video
monitoring.
Homelink
See page 43 of Sommer manual for programming
information.
Note:
While programming homelink to the vehicle it
will go through a learn cycle at least 3-4 times.
• Not compatible with car2u or Tesla
•
Homelink is on a 310 frequency
•
Homelink will be installed into the first four
prongs on the USART