UNPACKING AND INITIAL ASSEMBLY
21
1.
Open all snap locks on the tow bar (A) and (B).
2.
Pull the wheel frame evenly at the front and rear of the mainframe's
connecting pipes. Make sure that no more than 6 holes are visible.
Otherwise, sufficient stability is not guaranteed. Close the snap-locks
on the connecting bars (B).
3.
Pull the bar extension out of the bars until the tension in the tow bar
decreases noticeably. The wider you set the mainframe, the further
you have to set the tow bar extension. Close the snap-locks
subsequently (A).
A
B
6
1
