UNPACKING AND INITIAL ASSEMBLY
12
Assembling mainframe
1
For assembly you can check our video or follow the description below.
Video:
Description:
1.
Place the wheel frames and the trunk with the connecting pipes on
the floor as shown in the picture. Pay attention to the alignment of
the trunk:
short
side (A
)
below;
long
side (B
)
above!
Open the snap-locks (C) on the connecting tubes so that the wheel
frames can be inserted.
There is a reflector strip stitched on the outside of (B) for cross-
checking the side.
C
A
B
C
C
C
