ACCESSORIES
10
4
4
4.
Place the second half of the adapter sleeve on the tow bar extension
and close the cross connector.
5.
Tighten the four screws of the cross connector only as much that it
can still be turned.
6
7
8
6.
Now turn the bike connector forward by approx. 180°.
7.
Here, depending on its later position on the seat post, make sure that
it is aligned horizontally to the road. The length of the bike connector
should be adjusted so that the tow bar is not dragged on the bike.
8.
Now tighten the screws on the bike connector such that they cannot
be turned any further (
tightening torque 12 Nm
)
Attaching to the bike