re3D Gigabot X, Getting Started Manual, Page: 6 / 30

A | Receiving and Uncrating
Inside this crate is your Gigabot
®
X. We know you want to start printing,, but your new 3D
printer needs a little attention before your power it on. It’s currently wearing extra pieces
that protect it during shipping, but wreak havoc if left on during the printing process.
Follow these receiving and uncrating instructions first, and we’ll get you printing soon!
To uncrate a fully assembled Gigabot
®
X, you will need a Phillips head screwdriver and a
pair of diagonal cutters to cut zip ties. You will also need a 4mm hex driver and an 8mm
wrench, which are provided with the printer.
Upon delivery of the Gigabot
®
X, inspect all packages for damage prior to signing for the
delivery. If there is any damage, record it and report to our shipping manager within 24
hours at shipping@re3d.org.
For a video demonstration similar to the following instructions, feel free to watch our video
titled “GB3+ Uncrating” on our YouTube channel at
https://www.youtube.com/re3Dprinting/.
Gigabot
®
X printers configured for 110VAC power run at 60Hz and comes with a Type B
power cable. It requires a 20A circuit. Gigabot
®
X printers configured for 220VAC power
run at 50Hz, and you will need to provide your own power cable.
Gigabot
®
X operates best in a climate-controlled environment at a temperature of 15.5°C
(60°F) to 29°C (85°F) and at a humidity of 0%RH to 80%RH non-condensing.
6