re3D Gigabot X, Getting Started Manual, Page: 12 / 30

IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
Push the extruder back until the nozzle is past
the back edge of the bed. If the motors are
engaged and the extruder doesn’t move, use
the Viki to disable the steppers. To do this,
press the dial to reach the menus, scroll
clockwise to select and click “Prepare”, then
scroll and press the dial to select “Disable
Steppers”.
12
B1
With the nozzle still hanging off the back edge
of the bed, use the Viki to Home Z. To do this,
navigate to the ”Prepare” menu, then “Home
Z”.
B2
Use the Viki to preheat the extruder and the
bed to the preset temperatures for PLA. To do
this, navigate to the “Prepare” menu, click
“Preheat PLA”, and click “Preheat PLA All”.
Note: If the Gigabot
®
X extruder is loaded
with a material that is prone to degradation at
high temperatures, adjust the preheat
temperatures to the material.
B3