IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
IMAGE BOX:
Option A.
1. Place Image
2. Sent to Back
Use the 8mm combination wrench to
gradually tighten the [10540] M5 x 12 HHCS
at each quadrant. Periodically use the tool
setter to check the bed level, since tightening
the hardware on the rails may slightly move
them.
16
B13
After the final tightening, the bed will be level
and securely held in position. Relevel the bed
as needed for maintenance. If you have any
questions or concerns, please do not hesitate
to contact our support at [email protected].
B14
Summary of Contents for Gigabot X
Page 29: ...Notes 29...
Page 30: ...re3D org support re3d org...