EN
11
2
INSTALLATION
2 .1
Storage
Arrange the device in vertical position only. Store in closed envi-
ronments protected from the elements.
Do not stack the devices.
Do not turn the packaging upside down.
2 .2
Receipt and unpacking
The external unit is shipped in a cardboard box and the indoor
unit is protected by means of polystyrene protections.
A small pallet is arranged under the indoor unit to facilitating
handling and moving operations.
The packaging is appropriate to protect the machine from dam-
age during transportation and handling. The units are delivered
complete and in perfect condition, however we suggest that
you perform the following checks to determine shipping service
quality:
– On receipt of the packages, check them for any damage and,
if any is found, accept the goods with reserve, and keep pho-
tographic evidence of any damage found.
– Unpack and check the contents against the packing list.
– Make sure none of the parts have been damaged during
shipment; in case of damage you must report it to the ship-
ping company within three days of receipt, by registered let-
ter with return receipt, presenting photographic documen-
tation.
Copy of notice should also be sent by fax to the manufac-
turer. No notice of damage will be accepted after three days
from delivery.
For any controversies, the court of TRENTO has jurisdiction.
Handle the units in vertical position.
The units must be handled by qualified personnel provided
with equipment appropriate to the weight and size of the
device to be transported as shown below. If a forklift is used,
insert the forks in the specific openings. Avoid dangerous sit-
uations if a hoist is used to lift the device. If straps or chains
are used, check that they are in good conditions, of suitable
capacity and approved according to the safety rules in force
at the installation site.
Stay away from the surrounding area when the load is lifted
off the ground. Avoid laying or arranging the product hori-
zontally during handling operations. The cooling compressor
is fitted on vibration damping feet which could cause the
compressor to shift or push the connection pipes out from
their seats.
Keep the packing at least through the warranty period, in
case you need to ship the unit to the service centre for repair.
Dispose of the packaging correctly. Do not litter. Do not leave
the packaging (cardboard, staples, plastic bags etc.) within
reach of children because it is a source of potential danger.
Summary of Contents for PDC FLOOR 12T
