RDX QuickStation 4, Product Manual

Page: 95 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
85
Restarting and Shutting Down the RDX QuikStation 4
Restarting the RDX QuikStation 4:
1. From the Remote Management Console main menu,
select System Maintenance > System Restart.
2. Click [Yes] to confirm.
The system reboots. This process takes three minutes. When the reboot is
complete, the Remote Management Console interface is active again. You do not
have to sign in again to access the Console.
Shutting Down the RDX QuikStation 4:
1. From the Remote Management Console main menu,
select System Maintenance > System Shutdown.
2. Click [Yes] to confirm.
Note: If you cannot access the Remote Management Console, verify that your
network infrastructure is up and running and you are using a correct IP
address. Contact technical support if you need further assistance.
If the Remote Management Console is unavailable, you can initiate an OS
shutdown by quickly pressing the power button (1-2 seconds).
!
Important
Before you restart or shut down the system for any reason, make
sure there are no active hosts that are currently communicating with
the iSCSI targets.
!
Important
If you press and hold power button for more than 10 seconds, you
will immediately cut off a unit’s power for a hard power-off
without any software shut down. Any non-disconnected iSCSI
connection would be terminated. It is strongly advised to avoid
using power button as a standard procedure.