RDX QuickStation 4, Product Manual

Page: 51 / 116

O
CTOBER
2015 RDX Q
UIK
S
TATION
4
41
4. Set the MTU size used for the rest of the network, 1500 to 9000 bytes. The default
value is 1500 bytes.
5. If you are configuring a bonded setup, select a bonding configuration. By default,
the port setting is set for Active Backup, or Failover. In most cases, this default
setting will suffice for your network environment. See
Port Configuration Options
in the section below for more information.
Note: If “Bond all physical interfaces” was unchecked previously, the Bonding
Configuration drop-down menu does not appear.
6. Choose to either obtain network addressing automatically via DHCP or set static
addressing information. Tandberg Data recommends you set a static IP address to
prevent inadvertent address changes.

When DHCP configuration is selected, the DHCP server in your network
should provide all required information to configure network interfaces. No
additional setting is required.

When static IP address is selected, IP address and Subnet mask must be set.
DNS and Search Domains may only be set if the Default Gateway is set. Only
one Default Gateway may be set for all interfaces.
7. If you have selected Static IP Address Configuration, enter the IP address, the
subnet mask, and the default gateway.
Note: You can configure DNS and search domain only for static configuration
with gateway address set.
8. Add or modify the search domain (DNS lookup domain).