The Weighlog 2 is intended for use on skid-steer loaders, utility tractors with a
loader attachment, wheel loaders, backhoe loaders (loader side only) and gas
powered fork lifts.
It measures, displays and records the net weight lifted, normally based on
sensing the lift system hydraulic pressure. Pressures sensing is problematic
on certain types of equipment due to the design of the hydraulic system. In
these instances strain sensing technology may be used instead.
There are 5 individual display channels available. These can be calibrated for
up to 5 different loader attachments, different trailers or different commodities.
Each channel will display the net bucket weight lifted at any time. If required
the bucket weight can be added to the total for the channel in use and will
also be added to the TOTAL channel, which accumulates weight from all of
the five channels.
The instrument has an illuminated 4 digit LCD display, 3 front panel switches,
an external pushbutton, and an internal audible alarm. An external audible
alarm is optional.
The instrument is normally powered on via the ignition circuit and recalls the
function selected when last used.
With careful operation, system accuracy can be as good as ±1% of full load
although ±2% is more common in practice.
Weighlog
readings are not suitable as a legal basis for the sale of goods.
For each channel you can :
&
adjust the Calibration Factor
&
select either static or dynamic weighing mode.
&
set the Zero Weight (Tare).
&
display and add the bucket weight to the sub-total.
&
reset the Sub-total.
&
receive audible alarm confirmation of the tare and loading routines.
Overview
3
