EC9100i and EC9600i Series Scanner User Guide
Maintaining your scanner
©2016 RDM Corporation
Page 28
Installing the franker cartridge
1.
Disconnect the power cord.
2.
Remove the front cover of the scanner.
At the back of the scanner, the franker cartridge is held in place by a blue franker latch and a
metal plate.
3.
Lift the blue franker latch.
4.
Pull the franker cartridge out of the scanner by the franker tab.
5.
Insert the new franker cartridge. Make sure the top of the metal plate fits into the slot in franker
cartridge (as pictured).
6.
Secure the franker cartridge:
a.
Push the metal plate towards the body of the scanner (pushing in the franker cartridge).
b.
Lowering the blue latch over the franker cartridge until it snaps closed.
7.
Replace the scanner cover.
Installing the endorser inkjet cartridge
When you place the new inkjet cartridge into the holder, make sure that you insert it at the angle
described in the following steps. If you do not insert the cartridge properly, it might not make contact
with the document when it is scanned.
1.
Disconnect the power cord.
2.
Remove the endorsement printer cover.
3.
Pull the inkjet latch away from the inkjet cartridge (as pictured).
Franker tab
Metal plate
Franker latch
Franker slot
