EC9100i and EC9600i Series Scanner User Guide
Operating the scanner
©2016 RDM Corporation
Page 25
Signals in a typical document processing cycle
1.
The LED is Green (Solid): The unit is idle.
2.
The LED is Green (Flashing): The scanner is waiting for a document to be inserted for scanning.
3.
The LED is Green/Red (Flashing): The scanning operation is in progress.
4.
The LED is Green (Solid): The scanning operation is complete. The scanner has returned to its
idle state.
EC9600i series signals
Signals
Meaning
Immediately after starting the
scanner:
Solid red
The scanner is starting.
Long-red and two short-green
flashing cycle
Long-green and short-red
flashing cycle
The scanner does not detect an Ethernet or USB connection.
Long-green and short-green
flashing cycle
The scanner is ready and idle.
Note: The idle signal depends on your scanning application.
Solid green
When scanning:
Green flashing
The scanner is waiting for the user to insert a document into the
feeder.
When scanning:
Solid green
The scanner is waiting for the user to take action on the PC
application.
When scanning:
Green and red flashing cycle
The scanner is processing the documents. Wait for the scanner to
finish.
When scanning:
Red flashing
An error occurred while the scanner was processing the document.
Check your PC application for instructions or refer to your local
procedures. If you need more help, contact your distributor (reseller).
