RCG RCG i4 Flexi Installation Manual Download Page 8

Page: 8 / 63

Copyright



Page 7 of 63

i4 Flexi Installation Guide v2.1

hG [G m

i4 Flexi Access Control & Time Attendance Management System is a powerful tool for access

control and time attendance management. i4 Flexi adopts with latest optical fingerprint sensor and

high-precision fingerprint identification algorithm. With supports of RS485 (converter required) and

TCP/IP protocols, it can be implemented as both standalone and networked.

i4 Flexi adopts separate controller and centralized connection board design to enhance security.

Tamper alarm will go off if an intruder try to open the device and alarm relay output can be generated.

With its Wiegand Input and Output features, the system can be easily reinforced by just adding an

external reader. (Optional Wiegand Input– 26 bit or 34 bit). The i4 Flexi device can also act as a reader

to send out Wiegand signal to existing controller. (Optional Wiegand Output feature – 26 bit or 34 bit).

This offers more choices to end users.

i4 Flexi boasts an attractive apppearance with changeable casing design. It is easy to operate,

ready to implement and embedded with various innovative features. By using high resolution and blue

backlit LCD, clear and attractive image can be display. The keypad is made of durable material and so

heavy-duty usage is not a problem. Its built-in voice system provides an interactive operation mode.

i4 Flexi can store up to 5,000 fingerprints and supports 1:1 & 1:N identification. Its offers seven

verification modes, namely Fingerprint only, Password Only, Card only, fingerprint or password, Card

and fingerprint, Card and password, Card and Fingerprint and Password.

Summary of Contents for RCG i4 Flexi






























































Search results

Summary of Contents for RCG i4 Flexi

Reviews:

RCG RCG i4 Flexi, Installation Manual, Page: 8 / 63

Search results

Summary of Contents for RCG i4 Flexi

Reviews: