Copyright
RCG Holdings Limited. All rights reserved
Page 45 of 63
i4 Flexi Installation Guide v2.1
@A
B A
B
Q
E
O
R
FS
T
E
The Network mode option is a function to set the event log output to network or to Wiegand. Also, it is
a function to assign the network parameter. In addition, it is an operation mode with “Wiegand” setting:
@A
B A
B A
C
D
N
`
K
`
Select these methods when you use the Internet to access the terminal.
Follow the process
“3.Network =>3.Network Mode=>2.TCP/IP“, press “#” to enter the setup menu.
The following steps show how to register TCP/IP parameter
LCD Display
Description
In the standby mode, press the [MENU] key to enter the Setup menu.
1. Press “3” to enter Network page. (A function to set the networking
option)
2. Press “3” key or select the item with “#” key to enter.
3. Press “2” key or select the item with “#” key to enter. The following
interface appears
4. Press the key number or select the item with “#” key to enter the setting
menu of each function.
Note: Press “#” key to save and return to previous menu after each
setting modified.
5. For example, to modify the device IP, the following interface appears
Note: Use “Up” or “Down” key to select the portion and enter the
number.
1. User
2. Options
3. Network
4. Sys Info
1. Terminal
2. Controller
3. Network Mode
IP:
192.168.000.234
1. Wiegand Output
2. TCP/IP
3. Com Key
4. WiegContent
5. WiegandInput
1. Device IP
2. Subnet Mask
3. Gateway
4. Host IP
5. Host Port
6. MAC Address
Summary of Contents for RCG i4 Flexi
Page 1: ......