1 / 25
Section : 1 Introduction
1.1
General
KE-CD 1000
is a microprocessor-based controller used to analyze and control Conductivity or
TDS parameter in various water application.
KE-CD 1000
provides set point values and relay for
High Low signal.
KE-CD 1000
is simple to control through its 6-buttons control panel.
The backlit LCD contrast can be adjusted to user requirement. Provided logging function can
save instant parameter values with respect to time.
Inspect the exterior of the shipping package for any damage. Open the package and inspect the
controller and related hardware for missing or damaged parts.
If there is evidence of damage, notify the carrier immediately. If parts are missing, contact RCB
Chemicals & Services customer support representative.
How to enter password?
KE-CD 1000 controller contains built in 4-digit password feature which can be customized as
per user selection. Press upward and downward button to change the value of digit from 0-9.
Press forward button for next digit. Press enter button to enter the password.
Default password is
0000
for KE-CD 1000 controller.
1.2
Features
KE-CD 1000
controller is designed to be a fully isolated instrument for two-wire DC
applications.
-
Automatic and manual temperature compensation via RTD Pt1000.
-
Instrument supplied in durable (IP65) enclosure. (when installed in control panel)
-
Built-in internal Time, Date and Logger function.
-
Built-in programmable high low relay function.
-
High end encapsulated electronic components for humid and harsh environments.
-
Usually no calibration is required but 1 point calibration through any NIST or TCT
standard buffers can be done if required through buffer solution.
-
4 ~ 20 mA customizable analogue loop current outputs for plant operation.
-
Quick connection with sensors through connectors. (require tinned wires sensor)
-
Built in password protection for safety of instrument and process
.