KE-CD 1000 Process Controller
Essential Instructions
READ THIS BEFORE USING
KE-CD 1000
(CONTROLLER)
Thank you for choosing the
KE-CD 1000
controller
.
KE-CD 1000
is a microprocessor-based controller used to analyze and control Conductivity or
TDS parameter in various water application.
KE-CD 1000
provides set point values and relay for
High Low signal.
This manual explains the use of
KE-CD 1000
controller. This instruction manual is written to
cover as many anticipated applications of controller. The information presented in this manual
is subject to change without notice as improvements are made. Inform and educate your
personnel in the proper installation, operation, and maintenance of the product. To ensure
proper performance make sure that proper personnel operates, maintains and update the
product. When replacement parts are required, ensure that qualified personnel use
replacement parts specified by RCB Chemicals representative or call at provided number for
assistance. Unauthorized parts and procedures can
affect the product’s performance and place
the safe operation of the process at risk.
Refer installation ,operation and servicing to qualified personnel. Making cable connections to
controller and servicing this instrument requires access to shock hazard level voltages which
can cause death or serious injuries ,therefore disconnect all hazardous voltage before accessing
the electronics. Relay contacts made to separate power sources must be disconnected before
servicing.
For safety and proper performance this instrument must be connected to a properly
grounded three-wire power source.
RCB Chemicals & Services does not accept any responsibility for damage or malfunctioning of
the unit due to improper usage and maintenance of the instrument.
KE-CD 1000
controller
comes with a
3-Years
limited warranty. Kindly make sure to read the
Warranty Terms & Conditions
enclosed in the box.
KE
– CD 1000 PIM - R0
© 2020 RCB Chemicals & Services. All rights Reserved