16 / 25
B.1 Status (MTC / ATC)
Controller can be compensated both manually and
automatically according to conductivity sensor.
Automatic Temperature Compensation (ATC) needs
to be selected if the conductivity sensor has RTD
PT1000 feature. CDS 1000 series contains RTD
PT1000 feature for ATC. If the conductivity sensor
doesn’t have the RTD PT1000 feature than MTC will
be selected automatically.
Menu Button Insert Password Downward Button Calibration Enter
Button Downward Button Temperature Enter Button Downward
Button Status (MTC/ATC) Enter Button
Press enter to change the status to
MTC / ATC
.
Note:
Don’t forget to enter
temperature coefficient value. (See below option: b.2)
B.2 Temp. Setting
Manual Temperature Compensation (MTC) can be
performed using this feature.
Menu Button Insert Password Downward
Button Calibration Enter Button
Downward Button Temperature
Enter Button Downward Button
Temperature Setting Enter Button
Temperature setting has two options as set
temperature and temperature coefficient.
b.1 Set Temperature
Temperature value required for MTC can be provided in
this setting.
Menu Button Insert Password Downward
Button Calibration Enter Button Downward
Button Temperature Enter Button Downward
Button Temperature Setting Enter Button
Downward Button Set Temperature Enter Button
Press enter for MTC temperature value Box. Upward and
downward button will increase and decrease the main
value by 1. Forward and menu button will increase and
decrease decimal (.0) value by 1. For temperatures larger
than 100 it is recommended to reverse from end value by
pressing downward button. Press enter to save value and
escape for main display screen.