Other Information
Chapter 8
41
Graphics contained within this publication are for representation only.
The menu is displayed in a foreign language
•
The Menu Language preference is set to that language. From the DVD’s main menu, select the
Languages option
(In Spanish, shown as
Idiomas
; in French,
as
Langues
). From the Languages menu, select the
Player Menus
option (In Spanish, shown as
Menús del Lector
; in French, as
Menus Lecteur).
Highlight
the language you prefer and press OK.
No forward or reverse scan
•
Some discs have sections that prohibit rapid scanning, or title and chapter skip.
•
If you’re trying to skip through the warning information and credits at the beginning of a movie, you won’t be able to. This part of the movie is often
programmed to prohibit skipping through it.
Camera angle cannot be changed
•
Some discs don’t have the multi-camera angle system, and some discs only have it in certain parts of the movie.
Picture is too tall and thin
•
Change the aspect ratio using the
TV Image
setting in the Display menu (see Chapter 5).
Picture is too short and wide
•
Change the aspect ratio using the
TV Image
setting in the Display menu (see Chapter 5).
Cannot copy discs to video tape
•
You can’t record DVD discs onto videocassettes because the discs are encoded with anti-copy protection.
Full Version of Disc Does Not Play
•
The DVD might be locked. To unlock see Chapter 5.
Disc won’t eject
•
When you put a disc into the disc tray, it may take up to 15 seconds to read the disc. You won’t be able to eject the disc during this time. Wait 15 seconds
and try again.
I don’t remember my password and I want to unlock the DVD
•
If you forget your password, simultaneously press and hold OPEN/CLOSE and STOP on the TV/DVD’s front panel for 3 seconds. Enter a new password via the
Lock
menu.
TV Problems
TV won’t turn on
•
Press the TV button.
•
Make sure the TV is plugged in.
•
Check the wall receptacle (or extension cord) to make sure it is “live” by plugging in something else.
•
Something might be wrong with your remote control. Press the POWER button on the front of the TV. If the TV turns on, check the remote control
solutions on page 43.
•
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the
Front Panel Block
in the
Parental Control
menu and press OK to uncheck the box.
Buttons don’t work
•
If you’re using the remote control, press the TV button first to make sure the remote is in TV mode.
•
The front panel controls may be locked (disabled). Use the remote control to unlock the front panel controls by selecting the
Front Panel Block
in the
Parental Control
menu and press OK to uncheck the box.
•
Unplug the TV for two minutes and then plug it back in. Turn the TV on and try again.
TV turns off while playing
•
Sleep timer may have been activated. Go to page 34 for instructions.
•
Electronic protection circuit may have been activated because of a power surge. Wait 30 seconds and then turn on again. If this happens frequently, the
voltage in your house may be abnormally high or low.
•
Unplug. Wait five minutes. Plug in again.
