Chapter 7
39
Information Displays
Graphics contained within this publication are for representation only.
Using IntroScan (Available only on Audio CDs and MP3s)
IntroScan plays the first ten seconds of each track on the CD (similar to the scan feature that’s on many car
radios). To use IntroScan:
1. Press INFO on the remote (the Info Display appears).
2. Highlight the
IntroScan
icon. Press OK. The first ten seconds of each track will play.
• After IntroScan goes through all of the tracks, it stops.
• If you want to stop IntroScan while it’s in progress, press PLAY on the remote. The current track starts
playing in its entirety.
• You can also access IntroScan from the
Play Mode
menu in the DVD’s main menu.
Using Bookmarks (Available only on Audio CDs)
To store, use and clear bookmarks, go to page 21. The instructions are the same.
Dub Assist (Available only on Audio CDs)
Dub Assist helps you record a CD onto an audio cassette tape by determining the number of tracks that will fit
on one side of the tape so you have time to turn the tape over to record on the other side. Dub Assist does not
have an icon on the Info Display bar. It is activated through the DVD’s
Play
menu.
To use Dub Assist when you’re recording a CD onto an audio cassette:
1. Press STOP if a CD is playing (the DVD’s main menu appears).
2. Highlight
Play Mode
and press OK (the
Play Mode
options appear).
3. Highlight
Dub Assist
and press OK (the
Dub Assist
screen appears).
4. The highlight should be in the
Play Order
window. Choose
Standard
,
Optimized
, or
Program
.
Standard:
This is the default mode. The tracks are recorded in the order on the CD (track 1 is recorded first,
track 2 second, etc.)
Optimized:
The tracks are recorded in the order that optimizes the number of tracks that can fit on one side
of the audio cassette so you have the least amount of dead space at the end of the tape.
Program:
The tracks are recorded in the order you program. You must create your program in the
Edit
Program
menu that’s in the DVD’s
Play
menu.
5. Use the arrow keys to highlight the
Segment Length
box. When the
Segment Length
box is highlighted,
use the up/down arrow buttons to enter the length of one side of the audio cassette.
6. The order the tracks will be recorded in appears in the
Segment Length
box. Use the arrow keys to
highlight the
Start
box and press OK.
7. Follow the instructions on the screen to begin recording.
Use the Dub Assist screen to
determine how many CD tracks can
fit on a cassette.
