18
Learn Commands (continued)
11. To save and exit from the Learn routine, press and release the
LCD OK
key. The touchscreen returns to the Main
Setup Screen.
12. The Learning process is now complete.
Clear All Stored Learned Commands
Under a Mode
If you want to clear all of the Learning commands under one
mode, such as TV, VCR or DVD, follow these steps:
1. Press and hold the
SETUP
key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main
Setup Screen. This process takes
approximately 2-3 seconds.
2. Release the
SETUP
key.
3. Press and release the
LCD LEARN
key. The LED indicator light blinks
off once to indicate acceptance of
the keypress.
4. The touchscreen now shows the
Device Setup Screen. Press and
release the device key on the rubber
keypad for the mode commands you
want the RCU900RF to clear (
TV
,
VCR
,
SAT/CBL
, etc.). The LED indicator
light blinks once to indicate
acceptance of the keypress.
5. The touchscreen now shows the
Learn Setup Screen 1. Press and hold
the
SETUP
key until the Main Setup
Screen is displayed. All Learned
commands that were previously
stored under that mode are
now cleared.
Master Clear
Clearing all stored Learned commands is recommended before
first-time Learning. To clear all Learned commands, follow
these steps:
1. Press and hold the
SETUP
key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
2. Release the
SETUP
key.
Summary of Contents for RCU900RF
Page 15: ...15 Device Device ...
