RCA RCU900RF, User Manual

Page: 10 / 36

10
Code Search (continued)
your device, since you may discover
that some codes can turn on and
off your device but are not able to
control its other functions. This
process allows you to bypass codes
you’ve already tried.
Note:
If your device responds and
you accidentally overshoot that code
by pressing the
ON•OFF key again,
press the CH- key or DOWN
ARROW key to backtrack through
the code library. You can change the
direction to forward once again by
pressing the
ON•OFF , CH+ , UP
ARROW , or LCD PLAY keys.
9. Once the device to be controlled
responds to the commands,
press and release the
LCD OK key
to install the code. The touchscreen
returns to the Main Setup Screen. The
Code Search entry is now complete.
Code Autosearch
Your RCU900RF has the ability to automatically scroll through
the entire code library by using the Autosearch feature.
To start a Code Autosearch, follow these steps:
1. Manually turn on the device to be
controlled (TV, VCR, DVD, etc.).
2. Press and hold the SETUP key on
the rubber keypad until the LED
indicator light remains on and the
touchscreen shows the Main Setup
Screen. This process takes
approximately 2-3 seconds.
3. Release the SETUP key.
4. Press and release the
LCD CODE
key. The LED indicator light blinks
off once to indicate acceptance of
the keypress.
5. The touchscreen now shows the
Device Setup Screen. Press and
release the device key on the rubber
keypad for the device whose code
you want to enter (
TV , VCR ,
SAT/CBL , etc.). The LED indicator
light blinks once to indicate
acceptance of the keypress.
6. For AUX1 or AUX2, press the AUX
device key. Select the desired device
key to be programmed under AUX
(
TV , VCR , SAT/CBL , etc.).
7. The LCD touchscreen shows the
Code Setup Screen. Press and release
the
LCD SEARCH
key.
8. The LCD touchscreen shows the
Search Setup Screen. Press the
ON•OFF key on the rubber keypad
just once. If you do not press any
other keys, the Autosearch feature
automatically starts in six seconds.