This feature allows you to simultaneously delete all Learned commands.
Clearing all stored Learned commands is recommended before
first-time Learning.
Note:
If no commands have been learned, this option is not shown
in the Setup Mode.
Clearing all stored Learned commands under a specific mode
allows you to continuously update your remote with the
latest commands.
Note:
If no commands have been learned, this option is
not shown in the Setup Mode. Upon deletion of Learned
commands, all previously Learned keys under that
component mode return to their preset code functions.
To clear all Learned commands under one mode (e.g., TV, VCR,
DVD, PVR/DVR, etc.), follow these steps:
1. Press and hold the
SETUP
key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and
the touchscreen shows the Code Setup Mode? Screen.
2. Release the
SETUP
key.
3. Press and release the
SETUP
key repeatedly until the
Delete IR Mode? Screen appears.
4. Press and release the desired component key for the Learned
commands you want the RCU1010RF to clear (
TV
,
VCR
,
SAT
,
PVR/DVR
,
AUX
, etc.).
Note:
Only the components that have previously Learned
commands are shown on the LCD touchscreen.
5. The Confirm to Delete? Screen is displayed. Press and release
the
OK
key on the LCD touchscreen. The display shows the
Deleting Wait Screen. If there are no other component modes
with Learned commands, the Learn IR Mode? Screen appears.
If there are other component modes with Learned commands,
the Delete IR Mode? Screen is displayed.
6. All Learned commands that were previously stored under
that mode are now cleared. To exit the Setup Mode, press
and release the LCD
EXIT
key, followed by the LCD
OK
key
on the Exit Setup Screen.
Master Clear
To clear all Learned commands, follow these steps:
1. Press and hold the
SETUP
key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and the
touchscreen shows the Code Setup Mode? Screen.
2. Release the
SETUP
key.
3. Press and release the
SETUP
key repeatedly until the Delete
IR All? Screen appears.
4. Press and release the LCD
OK
key.
Note:
If, at this point, you wish to abort the Master Clear
operation, press and release the LCD
EXIT
key.
5. The Confirm to Delete? Screen is displayed. Press and release
the LCD
OK
key. The LCD touchscreen displays the Deleting
Wait Screen, followed by the Learn IR Mode? Screen.
6. All Learned commands are now cleared for all
component modes.
7. To exit the Setup Mode, press and release the LCD
EXIT
key,
followed by the LCD
OK
key on the Exit Setup Screen.
Clear All Stored Learned Commands Under a Mode
19
RCU_1010_RF_IB_RevA.qxd 9/24/03 10:30 AM Page 19
