6
During a Setup function, if no key is pressed for 60 seconds, the unit automatically exits from the
Setup mode. The LED indicator light flashes an error in this instance, and the LCD displays the
TimeOut Screen for three seconds. Any operation that is not completed when the timeout occurs
is not saved.
General Setup Notes
1. When in Setup Mode, pressing the LCD
LEARN
key automatically forwards to the
Learn IR Mode? Screen.
2. When in Setup Mode, pressing the LCD
MACRO
key automatically forwards to the
Set SmartMacro? Screen.
3. At any point in the Setup process, where a “save” is being made, the Confirm to Save? Screen is
displayed. Press and release the LCD
OK
key to save, or press and release the LCD
EXIT
key to
exit without saving any changes.
4. At any point in the Setup process, where an “overwrite” is being made (e.g., overwriting Macros,
Learned Modes, etc.), the Confirm to Overwrite? Screen is displayed. Press and release the
LCD
OK
key to confirm the change, or press and release the LCD
EXIT
key to exit without
overwriting any information.
5. At any point in the Setup process, where a “deletion” is being made (e.g., deleting Macros,
Timers, etc.), the Confirm to Delete? Screen is displayed. Press and release the LCD
OK
key
to confirm the deletion, or press and release the LCD
EXIT
key to exit without deleting
any information.
6. At any point in the Setup process, where a “change” is being made, the Success Screen displays
for one second to confirm the action.
Component Control Screens
Component Control Screens
Your RCU1010 displays a different control screen for each of the nine components. You can easily
switch between these components by simply pressing the desired LCD component key.
Cod
Summary of Contents for RCU1010
Page 1: ...Limited 90 Day Warranty Universal Learning Remote with TOUCHSCREEN User s Guide ...
Page 39: ...39 ...
Page 40: ...40 ...
