RCA RCU1010 User Manual Download

Page: 5 / 40

The following are the screen selections available in the Setup Mode.

1. Code Setup Mode?

2. Code Search Mode?

3. Key Labels Mode?

4. Set SmartMacro?

5. Delete a Macro?

(Only appears once a Macro
function has been programmed.)

6. Macro Key Delay Edit?

(Only appears once a Macro
function has been programmed.)

7. Setup a Timer?

8. Delete a Timer?

(Only appears once a Timer
function has been set.)

9. Learn IR Mode?

10. Delete IR Mode?

(Only appears once an
IR function has been learned.)

11. Delete IR ALL?

(Only appears once an
IR function has been learned.)

12. Set More Options?

Set Time?

Set Beep?

Set LCD On Time?

Set Light (Backlight) On Time?

Set Volume TV<>AUDIO?

13. Reset ALL?

14. Exit Setup

Enter Setup Mode

Exit Setup Mode

To exit the Setup Mode at any time and return to normal operation, follow these steps:

1. Press and release the LCD

EXIT

key on the touchscreen.

Then press and release the LCD

key on the Exit Setup

Screen. The remote is now in normal operation mode.

2. Press and release the

SETUP

key repeatedly until the LCD

displays the Exit Setup Screen. Press and release the LCD

key. The remote is now in normal operation mode.

Summary of Contents for RCU1010









































Search results

Summary of Contents for RCU1010

Reviews:

Related manuals for RCU1010

Brands by name

Popular brands

RCA RCU1010, User Manual

Search results

Summary of Contents for RCU1010

Reviews:

Related manuals for RCU1010

Brands by name

Popular brands