RCA RCU1010, User Manual

Page: 20 / 40

20
Set an Event Timer
Edit a SmartMacro Inter-key Delay (continued)
5. To change the delay time between keys, press and release
the LCD UP or DOWN ARROW key to select the desired
delay time. You can increase the delay time in 0.5 second
increments. Pressing the LCD
EXIT key programs the
default delay of 0.5 seconds.
6. After each inter-key delay you program, press and release
the LCD OK key to advance to the next inter-key delay.
7. Repeat steps 5-6 for each inter-key delay in the stored
Macro sequence.
8. The SmartMacro Inter-key Delay process is now complete.
To exit the Setup Mode, press the LCD
EXIT
key, followed by
the LCD
OK
key on the Exit Setup Screen.
Event Timer
The Event Timer lets you program your RCU1010 to turn a component (TV, VCR, AUDIO, etc.)
on or off at the preprogrammed time. For example, you can program your AUDIO equipment to
turn music on, program your TV as a Sleep Timer to turn off at a certain time, or program your VCR
to turn on and record. Up to four timer events can be set. However, events you program happen
only once, on the day you program them. You cannot program events for future days; they must
be on the current day. After setting up your Event Timer, be sure to leave the remote pointed at the
component(s) you have programmed it to control. To set an Event Timer, follow these steps:
1. Press and hold the SETUP key on the rubber keypad for
2-3 seconds until the LED indicator light remains on and
the touchscreen shows the Code Setup Mode? Screen.
2. Release the SETUP key.
3. Press and release the SETUP key repeatedly until the Setup
a Timer? Screen appears. Press and release the LCD OK key.
4. The Timer 1 Mode? Screen appears. Press and release the
desired component key ( TV , VCR , AUX , etc.).
5. The Timer 1 Key? Screen appears. Press and release the key
you want to program to activate after a certain time delay.
For example, to set your VCR to record, press and release the
VCR component key in step four, then the LCD RECORD key.
6. The Set Hours? Screen appears. The hour (HH) digits are
flashing. The day is not used for Event Timer settings. Press
and release the LCD
UP
or
DOWN ARROW
key to select the
desired hour. Press and release the LCD OK key.