RCA P60100 User Manual Download Page 30

Page: 30 / 58

4. If you have another VCR connected

to the TV, press MENU•PROG to
select the VCR 2 CHAN function.

5. Enter the channel number you want

to program by pressing two digit
buttons on the remote control. (This
is the channel number to which the
TV will tune automatically when you
later press the VCR2•LD button on
the remote.) See the notes below if
you are unsure about which channel
number to enter.

6. Press the + button to program the

channel number you selected into the
VCR 2 CHAN function memory.

Note: Pressing the – button here will
turn off this feature and display
VCR 2 CHAN: OFF again.

1. Repeatedly press MENU•PROG to

select SETUP MENU, and then press
+ or – to display the setup functions.
Repeatedly press MENU•PROG to
select the VCR 1 CHAN function.

2. Enter the channel number you want to

program by pressing two digit buttons
on the remote control. (The channel
number you enter is the channel to
which the TV will tune automatically
when you later press the VCR1 button
on the remote.)

3. Press the + button to program the

channel number you selected into the
TV’s memory.

Note: Pressing the – button here will turn
off this feature and display
VCR 1 CHAN: OFF again.

Setting Up VCR Channels

The VCR 1 CHAN function lets you
program to which channel the TV will
automatically tune when you press the
VCR1 button on the remote. This is
handy if you connect a VCR to your
TV. You will no longer have to
remember to which input jacks the
VCR is connected because the TV will
remember for you.

For example, if you connect a VCR’s
AUDIO/VIDEO OUT jacks to the TV’s
INPUT 1 jacks (as shown on page 35),
you will no longer have to remember
to select channel 91 on the TV to see
what the VCR is playing. By entering
channel 91 next to the VCR 1 CHAN
function, the TV will automatically
tune to channel 91 each time you press
the VCR1 button on the remote.

This function is especially convenient
if you have a compatible VCR that can
be operated by the VCR1 button on the
remote. Pressing VCR1 will then not
only turn on the VCR but also
automatically tune the TV to the
proper channel for viewing the picture
from the VCR. You can program most
brands of remote-controllable VCRs to
respond to the VCR1 button as
described on page 38.

The VCR 2 CHAN function works the
same way. It lets you program to
which channel the TV will
automatically tune when you press the
VCR2•LD button on the remote. You
can program most brands of remote-
controllable VCRs to respond to the
VCR2•LD button as described on
page 38. Pressing the VCR2•LD
button will then not only turn on the
VCR but also automatically tune the
TV to the proper channel for viewing
the picture from the VCR.

Note: Pressing the VCR1 or VCR2•LD
button does not change between ANT A and
ANT B antenna inputs as explained on page
18. Press the ANTENNA button on the
remote control to change antenna inputs if
necessary.

Notes about Entering Channel Number:
• Enter channel 91 if VCR is connected to the TV’s audio and video INPUT 1 jacks.
• Enter channel 92 if VCR is connected to the TV’s audio and video INPUT 2 jacks.
• Enter channel 90 if you have a Super-VHS VCR that is connected to the TV’s

S-VIDEO connector and INPUT 1 audio jacks (labeled L and R/MONO).

• Enter channel 03 (or 04) if you did not use any audio/video cables and connected the

VCR to the TV’s round antenna jack labeled ANT A or ANT B. Enter the same
channel number (03 or 04) as the position of the VCR’s CH3/CH4 switch. This is
the channel to which you must tune your TV for viewing signals from your VCR.

• Refer to pages 35-36 if you want to review details about connecting your VCR to

your TV.

Setting Up VCR Channels (

with or without remote)

Chan Mem: Stored
Antenna: A
Cable/Air: AIr
VCR1 Chan: 91
VCR 2 Chan: 92

7:57 PM Input 1 91

Chan Mem: Stored
Antenna: A
Cable/Air: AIr
VCR1 Chan: 91
VCR 2 Chan: Off

8:04 PM Input 2 92

Chan Mem: Stored
Antenna: A
Cable/Air: AIr
VCR1 Chan: 91
VCR 2 Chan: Off

Mute
Video Menu
Audio Menu

Setup Menu

Chan Mem: Stored
Antenna: A
Cable/Air: AIr