- 29 -
There are several ways to initiate a call:
1.
Press an available line button and dial the number you want to call, or
2.
Dial a number and select the audio device, or
3.
Go to Directory, use the navigation keys to select the desired contact, or
4.
Enter the call history interface, then use the navigation keys to make your
selection or
5.
Press a Line key which has been set as speed dial button or
6.
Long press on a digit key that has been set as speed dial key.
To terminate a call you can:
1.
press the Cancel soft key or
2.
If you are in handset mode, replace the handset on hook or
3.
If you are in handsfree mode, press the SPEAKER key
Send Key configuration
Admin can set a specific button (“#” or “*”) as the send key. If this feature is enabled,
once you’ve dialed the desired number, you can press this send key to call your
correspondent immediately.
To set the send key via the phone interface:
1)
Make sure active User Type is admin or var
2)
Press Menu soft key -> 2.Features
-> 4.Send Key to enter the configuration
page.
3)
Press the Left/Right navigation keys to choose a button that you want to use as
the send key: “#”, “*”, or disable this option.
4)
Press Save soft key to save the changes, or Back soft key to discard.
To set the send key via the Web interface:
Go to Phone -> Features (General Information)
Summary of Contents for IP120
