RCA IP120 Manual Download Page 23

Page: 23 / 57

- 23 -

Note:

By default date and time setting is set to “Manual”.

Audio Settings

Volume

Handset, speaker, headset and ringer volumes can be adjusted independently.

To adjust the volume in idle mode:

Press menu soft key->3.

Settings

->1.

Basic

Scroll to 4.

Phone Volume

, and press OK button. Select the item you wish to adjust

and use

Volume

Down

and

Volume

or left and right navigation keys to increase or decrease

volume.

Press OK button to save volume change or press Back soft key to cancel.

To adjust ring volume you can also press

Volume

Down

and

Volume

when the phone is in idle

status.

To adjust the volume when you are in an active call:

When Handset/Headset/Hands-free mode is activated, press

Volume

Down

Volume

adjust the volume.

Note:

The volume can only be adjusted via Phone interface.

Ring Tones

You can select the type of the ring tone.

Summary of Contents for IP120


























































Search results

Summary of Contents for IP120

Reviews:

Related manuals for IP120

Brands by name

Popular brands

RCA IP120, Manual

Search results

Summary of Contents for IP120

Reviews:

Related manuals for IP120

Brands by name

Popular brands