RCA Intuition HT, Product Manual

Page: 4 / 12

4
Product Manual – INTUITION HT
INSTALLATION
MASTER CONTROL UNIT (MCU)
1. Insert a USB cable into the top USB slot in middle rear of MCU ( indicated as USB in fig. 1).
2. Insert blue, male-ended VGA monitor cable from the touchscreen into female monitor port on the left rear of
the MCU (Monitor, fig. 1).
3. Insert white/grey female-ended serial cable from the switching system into left male serial port
(Switching,
fig. 1).
4. Insert red and white male RCA cables into same color ports
(Audio, fig. 1).
5. Insert power cable into power port (AC, fig. 1).
TOUCHSCREEN
1. Insert a USB cable from the MCU into the USB
slot on the bottom of the touchscreen ( circled
in fig. 2).
2. Insert blue, male-ended VGA monitor cable
from the MCU into female monitor port on the
bottom of the touchscreen.
3. Insert power cable into power port.
SWITCHING INTERFACE BOARD
1. Insert white/grey female-ended serial cable from the MCU
into the interface board connected to your MTI switching
system. (
fig. 3)
fig. 1 – Master Control Unit
fig. 3 – Switching interface board
fig. 2 – Touchscreen