Setup and Connections
7
How to View Your Components
To watch programming received via satellite
with this connection, tune the TV to either
channel 3 or 4. (The default is channel 3. You
may change the output channel to 4 by
choosing
Systems Options
from the Main
menu and selecting
Output Channel
.)
To record programming, tune the receiver to
the desired channel and set your VCR to
record on channel 3 or 4.
To view VCR recordings, tune the TV to the
VCR output channel (usually CH 3 or 4) and set
your VCR to play. If your VCR is a brand other
than RCA, GE, or P
RO
S
CAN
, you may need to
program the remote to control the VCR. See
the next section, “Programming the Remote.”
Basic Connection
SATELLITE IN
IN
FROM
ANT
OUT
TO
TV
SATELLITE
RECEIVER
VCR
IN FROM ANT
OUT TO TV
IN
CH3
CH4
TV
SATELLITE
DISH
CABLE OR
OFF-AIR ANTENNA
CAUTION
Do not stack electronic components or
other objects on top of the receiver. See
“Safety Information” inside the front
cover.
