3. Press
caller ID-volume
(
or
) button to scroll to ROOM MONITOR.
4
. Press the
mute/menu OK
button to enter ROOM MONITOR menu. The
screen displays
ROOM MONITOR EXTENSION
?
5. Use the touch tone pad to enter the handset name/number to be
monitored.
NOTE: When this phone system is expanded (up to 4
handsets by purchase of optional Model 2110 handset
with recharge cradle), handsets are named HANDSET
1, HANDSET 2, HANDSET 3 and so on respectively.
6. The receiving handset will turn on the microphone and the originating
handset will turn on the speakerphone to monitor sound from the receiving
handset .
NOTE: For room monitoring mode to work, the
originating handset must NOT be on the cradle.
NOTE: While in room monitoring mode, the handsets will
emit an alert tone approximately every 5 seconds if there
is an incoming call. You may press the TALK/SPEAKER
button to quit room monitor and answer the call.
NOTE: While in room monitoring mode, the originating
handset can be switched to monitor by handset earpiece
by pressing the TALK/SPEAKER button once. Switch back to
speakerphone by pressing the TALK/SPEAKER button once.
NOTE: Press the END button on the handset to exit room monitor mode.
Alarm Clock
1. Make sure your phone is
OFF
(not in TALK mode)
2. Press the
mute/menu OK
button to go to the main menu.
3. Use the caller
ID-volume
(
or
)) button to scroll to
ALARM CLOCK.
4
. Press
mute/menu OK
button to enter the menu. The screen displays
ON >
OFF
.
5. Use the
caller ID-volume
(
or
) button to select
ON or OFF
. Press
mute/menu OK button to confirm.
6. If
ON
is selected, then the screen displays
SET ALARM TIME.
Use the
number keys to enter the alarm time (for example, 02:10PM) key in 0210.
Use the
caller ID-volume
(
or
) button to select
AM or PM
.
7. Press
mute/menu OK
button to display >
ONCE OR DAILY
and select
ONCE
or DAILY.
8. Press the
mute/menu ok
button to save selection. You will hear a
confirmation tone and return to main menu.