Call Timer
After you press the
TALK/SPEAKER
button on the handset, the built-in call
timer shows on the display and counts the length of time of the call in minutes
and seconds.
Auto Standby
If you place the handset in the cradle while the handset is off the hook (during
a call), the call is automatically disconnected.
Ringer Volume (Shortcut)
There are two ways to set the ringer volume. One is the traditional way as
described in the Programming Functions; Sound Setup; Ringer Volume menus.
The other one is this short cut to ringer menu.
1. Make sure the phone is
OFF
(not in TALK mode).
2. Press the #pause/ringer button to display
SET RINGER LEVEL 5
.
3. Use the
caller ID-volume
(
or
) button to scroll to your selection.
LEVEL
5 is the default setting.
4
. Press
#pause/ringer
button again to save and display the new selection
for a few seconds.
Flash/Call Waiting
If you subscribe to the combined Call Waiting Caller ID service from your local
telephone company, you will receive Caller ID information (if available) on Call
Waiting calls. During a phone call, you will hear a beep to indicate another call
is waiting on the line and Caller ID information for the waiting call shows on
the handset display.
• To connect to the waiting call, press the
flash
button on the handset, and
your o r i g i n a l call is put on hold.
• To switch between the two calls, press the
flash
button.
Last Number Redial
You may redial a number up to 20 digits long. To quickly redial the last number
you dialed:
1. Press the
TALK/SPEAKER
button.
2. Press the
redial/format
button.
-OR-
3. Press the
redial/format
button first , then use the
caller ID-volume
(
or
)
button to select the desired redial number.
- Press the
caller ID-volume
(
) to review the oldest call and scroll toward
the most recent calls (higher numbers).
